Laurin Stainless 58mm Blade

Click here for more details on Laurin blades and fittings!

A very small blade, which could make a knife for gathering mushrooms or other small, fine-precision tasks like butchering small game.

Below are the detailed measurements of this blade:
  Overall Length: 6.625 inches (16.8 cm)
  Blade Length: 2.25 inches (5.7 cm)
  Blade Width: 0.58 inches (1.5 cm)
  Blade Thickness: 0.06 inches (1.5 mm)
  Ricasso Width: 0.66 inches (1.7 cm)
  Ricasso Thickness: 0.07 inches (1.8 mm)
  Blade Weight: 0.6 ounces (17 grams)
  Tang Length: 4.375 inches (11.1 cm)
  Tang Thickness: 0.07 inches (1.8 mm)
  Tang Width (At Blade): 0.38 inches (1 cm)
  Tang Width (At End): 0.14 inches (3.6 mm)
  Blade Material: stainless

Here are the fittings that this blade can be paired with, based on the sizes of the blade, tang, and slot. Any fitting labelled “might be too small/big” will still fit the blade, but might not be a good match depending on the style of knife that you’re making.

  Ferrule 11mm x 17mm Brass Straight: slot is a bit too small, will need to be filed wider/longer
  Ferrule 11mm x 17mm Nickel Straight: slot is a bit too small, will need to be filed wider/longer
  Bolster 15mm x 22mm Brass Straight: might be too big
  Bolster 15mm x 22mm Nickel Straight: might be too big
  Bolster 16mm x 24mm Brass Straight: might be too big
  Bolster 16mm x 24mm Nickel Straight: might be too big
  Bolster 18mm x 27mm Brass Straight: might be too big
  Bolster 18mm x 27mm Nickel Straight: might be too big
  Bolster 18mm x 35mm Brass Straight: might be too big
  Bolster 18mm x 35mm Nickel Straight: might be too big
  Bolster 19mm x 30mm Brass Straight: might be too big
  Bolster 19mm x 30mm Nickel Straight: might be too big
  Ferrule 15mm x 23mm Brass Straight: might be too big
  Ferrule 15mm x 23mm Nickel Straight: might be too big
  Ferrule 13mm x 18mm Brass Straight: slot too wide, will need extra glue or solder
  Ferrule 13mm x 18mm Nickel Straight: slot too wide, will need extra glue or solder