Mora KBH-1 Knife Blade No. 1 Carbon Steel

This is a high carbon steel blade, hardened to 58-60 Rockwell. The size and profile of this knife would make a great all-around utility knife.

Below are the detailed measurements of this blade:
  Overall Length: 7 inches (17.8 cm)
  Blade Length: 3.875 inches (9.8 cm)
  Blade Width: 0.7 inches (1.8 cm)
  Blade Thickness: 0.07 inches (1.8 mm)
  Blade Weight: 1 ounces (28 grams)
  Tang Length: 3.125 inches (7.9 cm)
  Tang Thickness: 0.07 inches (1.8 mm)
  Tang Width (At Blade): 0.45 inches (1.1 cm)
  Tang Width (At End): 0.17 inches (4.3 mm)
  Blade Material: high carbon steel

Here are the fittings that this blade can be paired with, based on the sizes of the blade, tang, and slot. Any fitting labelled “might be too small/big” will still fit the blade, but might not be a good match depending on the style of knife that you’re making.

  Bolster 13mm x 18mm Brass Shaped: might be too small
  Bolster 13mm x 18mm Nickel Shaped: might be too small
  Bolster 16mm x 24mm Brass Shaped: might be too big
  Bolster 16mm x 24mm Nickel Shaped: might be too big
  Bolster 18mm x27mm Brass Shaped: might be too big
  Bolster 18mm x 27mm Nickel Shaped: might be too big
  Bolster 18mm x 35mm Brass Shaped: might be too big
  Bolster 18mm x 35mm Nickel Shaped: might be too big
  Bolster 19mm x 30mm Brass Shaped: might be too big
  Bolster 19mm x 30mm Nickel Shaped: might be too big
  Bolster 15mm x 22mm Brass Shaped: slot too wide, will need extra glue or solder
  Bolster 15mm x 22mm Nickel Shaped: slot too wide, will need extra glue or solder
  Ferrule 15mm x 23mm Brass Shaped: slot too wide, will need extra glue or solder
  Ferrule 15mm x 23mm Nickel Shaped: slot too wide, will need extra glue or solder